 It appears you have not yet registered with our community. To register for free click here
|
 | |
General Diving Forum Anything which is diving related but not covered by the other forums. Want to make an announcement, found a cool diving video, need to blow of steam, whatever - it's open to you.
 |
| | Thread Tools |
February 13th, 2006, 02:47 PM
| #2 (permalink) |
| New Member  Join Date: Nov 2005 Location: Reading, Berkshire
Posts: 555
  | I might be up for this. I have some Mk20s I've been thinking of getting rid of. Looking at the image below, which side is the 1/2" LP port on? 
__________________ "I know that you believe that you understand what you think I said, but I am not sure you realise that what you heard is not what I meant." "Make me one with everything" said the Mystic to the Hamburger vendor. UK Diving Forum Sryth: A Free Online Text RPG Join the Adventure! Fallen Sword: Free online RPG |
   |
|
February 13th, 2006, 02:51 PM
| #3 (permalink) |
| Padawan learner  Join Date: Nov 2005 Location: Bracknell, Berkshire
Posts: 797
 | I thought only the DST has a 1/2" LP port. Not any of the others
__________________ http://jb2cool.bulldoghome.com |
| |
|
February 13th, 2006, 02:56 PM
| #4 (permalink) |
| New Member  Join Date: Dec 2005 Location: Nottingham
Posts: 246
| Quote: (Originally Posted by jb2cool) I thought only the DST has a 1/2" LP port. Not any of the others The 100 and 200 1st stages have the 1/2" port too. It's on the side so that if you screw the 1st stage DIN in and have the environmental seal pointing downwards, it comes over your right shoulder. Personally I've got a 1/2" to 3/8" adapter and a standard blanking plug in it.So looking at that photo the 1/2" port is on the other side. Hang on- that's not right. Hmmmmmmmmmmm. |
| |
|
February 13th, 2006, 03:00 PM
| #5 (permalink) |
| Padawan learner Join Date: Nov 2005 Location: Bracknell, Berkshire
Posts: 797
| so it'll be this one then? **EDIT** Removed image to save confusion
__________________ http://jb2cool.bulldoghome.com Last edited by jb2cool; February 13th, 2006 at 03:10 PM. |
| |
|
February 13th, 2006, 03:03 PM
| #6 (permalink) |
| New Member  Join Date: Nov 2005 Location: Harby, Leicestershire, working in Leeds
Posts: 142
| No, it's diagonally opposite the one you've marked. If you have the enviro-seal pointing upwards (so that the HP ports point down & out) the 1/2" port/hose comes out over your right shoulder. Andy |
| |
|
February 13th, 2006, 03:08 PM
| #7 (permalink) |
| Padawan learner Join Date: Nov 2005 Location: Bracknell, Berkshire
Posts: 797
| Andy C and Woz both say right shoulder but Woz says dry seal pointing down, Andy C says dry seal pointing up.  Soeone has it wrong.
__________________ http://jb2cool.bulldoghome.com |
| |
|
February 13th, 2006, 03:22 PM
| #8 (permalink) |
| New Member  Join Date: Nov 2005 Location: London, UK
Posts: 657
| Quote: (Originally Posted by jb2cool) Andy C and Woz both say right shoulder but Woz says dry seal pointing down, Andy C says dry seal pointing up. http://www.deepsouthdivers.org/ATX200_1st.pdf - page 15 Soeone has it wrong. Primary MP port is 1/2" and comes over right shoulder with seal pointing up. |
| |
|
February 13th, 2006, 05:53 PM
| #9 (permalink) |
| New Member Join Date: Dec 2005 Location: Nottingham
Posts: 246
| Quote: (Originally Posted by jb2cool) Andy C and Woz both say right shoulder but Woz says dry seal pointing down, Andy C says dry seal pointing up. I think it's very probably me Soeone has it wrong.  |
| |
