Scubapro S600 faceplate

Pem · July 3rd, 2009, 09:26 PM

I would like to be able to remove the ones on my s600/s555's but have never tried before,there is a locking pin that i think you have to remove,is this correct? also is it a standard anticlock thread? thanks,simon.

Leg of Salmon · July 3rd, 2009, 09:43 PM

I did it recently to make my BSAC club happy smiley.

There is a little pin on the outside edge of the faceplate. Remove this carefully. Then it is just a standard thread.

I left the locking pin out so I can clear stuff out of my reg if needs be. One day I want to be a well hard super-duper cave diver

Pem · July 3rd, 2009, 10:02 PM

Ta for that,will have a pop at that later

July 3rd, 2009, 09:26 PM	#1 (permalink)
Pem (Online) Romer Treece fan club Join Date: Feb 2009 Location: Crewe,Cheshire Posts: 116	I would like to be able to remove the ones on my s600/s555's but have never tried before,there is a locking pin that i think you have to remove,is this correct? also is it a standard anticlock thread? thanks,simon. __________________ Simon Team Teabag,just add to water,a splash of o2 and add helium to taste

July 3rd, 2009, 10:02 PM	#3 (permalink)
Pem (Online) Romer Treece fan club Join Date: Feb 2009 Location: Crewe,Cheshire Posts: 116	Ta for that,will have a pop at that later __________________ Simon Team Teabag,just add to water,a splash of o2 and add helium to taste

July 3rd, 2009, 09:43 PM	#2 (permalink)
Leg of Salmon (Online) The Trabant Join Date: Dec 2007 Location: Belfast Posts: 497	I did it recently to make my BSAC club happy smiley. There is a little pin on the outside edge of the faceplate. Remove this carefully. Then it is just a standard thread. I left the locking pin out so I can clear stuff out of my reg if needs be. One day I want to be a well hard super-duper cave diver