O´rings

scorpora · June 16th, 2007, 11:00 AM

HELLO

I will be very pleased if anyone give some advice for where can I buy (online) spares sets of o-rings for my 9 amp NIMH salvo light (canister and bulb)? (the ISO number of those o-rings will be also very apreciate).

I have asked to divingniknaks but don´t see this stuff in the web page and I understand that no answer means no O in stock.

Any helps should be greatfully paid (with prays

)

Best

PD. Can anyone tell me if the canister for the 9 amp NIMH battery is the same to 13.5 Lion (salvo lights of course) and they spend the same type of O rings?

Thanks again!

david_1 · June 16th, 2007, 02:08 PM

Quote: (Originally Posted by scorpora)

I will be very pleased if anyone give some advice for where can I buy (online) spares sets of o-rings for my 9 amp NIMH salvo light (canister and bulb)? (the ISO number of those o-rings will be also very apreciate).

just take the ones you have to a shop and get them measured. then tell us :-)

The canister lid one is not so critical as the deeper you go, the more pressure is put on it.
The test tube ones I think need to be quite close to the original ones because they are working ( sealing ) in a diffirent way.

David

alexmzz · June 18th, 2007, 12:33 PM

Your local dive shop should stock several sizes of 'o' rings. They're usually of a harder texture than the standard 'o' ring. In Australia I was told to ask for a '90 or 70 durometer' when asking for 'o' rings for dive gear. You should check it out as ordinary ones might not be up to it! I was looking for spares for my reg.

GLOC · June 18th, 2007, 12:35 PM

Quote: (Originally Posted by alexmzz)

Your local dive shop should stock several sizes of 'o' rings.

Alex, I doubt an LDS would stock the O-rings that sit between a canister and the lid of the torch.

alexmzz · June 18th, 2007, 12:38 PM

They should be able to tell you where to go for them and what standard to ask for.

diverinblack · June 18th, 2007, 10:52 PM

Go to:
Go Diving Belgium

Then (menu,left):
"Diving Lights", "Accessories", "Spare Parts".

Steve Clark · June 18th, 2007, 11:16 PM

If you can find out the size (ISO / AS568A Dash number) then this US site has every size you could possibly want.

McMaster-Carr

Also very cheap for general viton reg o-rings if you want a stock for life. I did have a chart of the standard sizes, but can't find it at them moment

Edit: -

Some info here How to Buy O-Rings For Scuba

Dash number:
003 HP Hose/ SPG Swivel
010 LP Hose / 2nd Stage
011 Standard 3/8" Lrt
012 7/16" HP Port/ Hose Manifold
013 1/2" LP Large Port
014 Std Yoke Regulator/ K-valve
015 Tank Valve Bonnet Nut
111 Small DIN Regulator/Valve
112 Standard DIN Regulator Valve
116 1/2" Tank Neck (small)
214 3/4" Tank Neck (large)

Steve

jluttichau · June 19th, 2007, 12:52 AM

Quote: (Originally Posted by Steve Clark)

Dash number:
003 HP Hose/ SPG Swivel
010 LP Hose / 2nd Stage
011 Standard 3/8" Lrt
012 7/16" HP Port/ Hose Manifold
013 1/2" LP Large Port
014 Std Yoke Regulator/ K-valve
015 Tank Valve Bonnet Nut
111 Small DIN Regulator/Valve
112 Standard DIN Regulator Valve
116 1/2" Tank Neck (small)
214 3/4" Tank Neck (large)

Steve

That is extremely usefull.. i wish i had a list like that for all my gear, scooters, lights, regs, inflator etc.

Cheers
Jonas

scorpora · June 19th, 2007, 08:16 AM

Thanks to all.

Divingniknaks · June 19th, 2007, 02:05 PM

Quote: (Originally Posted by scorpora)

HELLO

I will be very pleased if anyone give some advice for where can I buy (online) spares sets of o-rings for my 9 amp NIMH salvo light (canister and bulb)? (the ISO number of those o-rings will be also very apreciate).

I have asked to divingniknaks but don´t see this stuff in the web page and I understand that no answer means no O in stock.

Any helps should be greatfully paid (with prays

)

Best

PD. Can anyone tell me if the canister for the 9 amp NIMH battery is the same to 13.5 Lion (salvo lights of course) and they spend the same type of O rings?

Thanks again!

Hi,

Sorry for not answering but we didn't get your original request I'm afraid.

We do keep the spare lid o-rings but just never got round to putting them up on the site, email me again

The can size for the 9A Nimh is not the same as the 13.5 Li Ion. And therefore the O rings are a different size again.

Hope that helps

Best wishes

June 16th, 2007, 11:00 AM	#1 (permalink)
scorpora(Offline) Next please Join Date: May 2006 Location: spain Posts: 133	O´rings HELLO I will be very pleased if anyone give some advice for where can I buy (online) spares sets of o-rings for my 9 amp NIMH salvo light (canister and bulb)? (the ISO number of those o-rings will be also very apreciate). I have asked to divingniknaks but don´t see this stuff in the web page and I understand that no answer means no O in stock. Any helps should be greatfully paid (with prays ) Best PD. Can anyone tell me if the canister for the 9 amp NIMH battery is the same to 13.5 Lion (salvo lights of course) and they spend the same type of O rings? Thanks again!

June 18th, 2007, 12:33 PM	#3 (permalink)
alexmzz(Offline) New Member Join Date: Jun 2007 Location: South Australia Posts: 66	o rings Your local dive shop should stock several sizes of 'o' rings. They're usually of a harder texture than the standard 'o' ring. In Australia I was told to ask for a '90 or 70 durometer' when asking for 'o' rings for dive gear. You should check it out as ordinary ones might not be up to it! I was looking for spares for my reg.

June 18th, 2007, 12:35 PM	#4 (permalink)
GLOC (Online) Moderator Join Date: Nov 2005 Location: Fleet, Hants Posts: 1,953	Quote: (Originally Posted by alexmzz) Your local dive shop should stock several sizes of 'o' rings. Alex, I doubt an LDS would stock the O-rings that sit between a canister and the lid of the torch. __________________ Gareth Images of Life Photography DIR Team Foxturd Travels Underwater and Further Afar If you don't have the time to do something right, where are you going to find the time to fix it? - Stephen King

June 18th, 2007, 10:52 PM	#6 (permalink)
diverinblack(Offline) New Member Join Date: Feb 2006 Location: Portugal Posts: 31	o rings Go to: Go Diving Belgium Then (menu,left): "Diving Lights", "Accessories", "Spare Parts". __________________ www.entrada.tv DIR-Portugal

June 18th, 2007, 11:16 PM	#7 (permalink)
Steve Clark(Offline) New Member Join Date: Oct 2006 Location: Preston, UK Posts: 6	If you can find out the size (ISO / AS568A Dash number) then this US site has every size you could possibly want. McMaster-Carr Also very cheap for general viton reg o-rings if you want a stock for life. I did have a chart of the standard sizes, but can't find it at them moment Edit: - Some info here How to Buy O-Rings For Scuba Dash number: 003 HP Hose/ SPG Swivel 010 LP Hose / 2nd Stage 011 Standard 3/8" Lrt 012 7/16" HP Port/ Hose Manifold 013 1/2" LP Large Port 014 Std Yoke Regulator/ K-valve 015 Tank Valve Bonnet Nut 111 Small DIN Regulator/Valve 112 Standard DIN Regulator Valve 116 1/2" Tank Neck (small) 214 3/4" Tank Neck (large) Steve Last edited by Steve Clark; June 18th, 2007 at 11:34 PM.

June 16th, 2007, 02:08 PM	#2 (permalink)
david_1(Offline) New Member Join Date: Jul 2006 Location: sussex Posts: 295	Quote: (Originally Posted by scorpora) I will be very pleased if anyone give some advice for where can I buy (online) spares sets of o-rings for my 9 amp NIMH salvo light (canister and bulb)? (the ISO number of those o-rings will be also very apreciate). just take the ones you have to a shop and get them measured. then tell us :-) The canister lid one is not so critical as the deeper you go, the more pressure is put on it. The test tube ones I think need to be quite close to the original ones because they are working ( sealing ) in a diffirent way. David

June 18th, 2007, 12:38 PM	#5 (permalink)
alexmzz(Offline) New Member Join Date: Jun 2007 Location: South Australia Posts: 66	They should be able to tell you where to go for them and what standard to ask for.

June 19th, 2007, 12:52 AM	#8 (permalink)
jluttichau(Offline) Custom User Title Join Date: Nov 2005 Location: Denmark Posts: 437	Quote: (Originally Posted by Steve Clark) Dash number: 003 HP Hose/ SPG Swivel 010 LP Hose / 2nd Stage 011 Standard 3/8" Lrt 012 7/16" HP Port/ Hose Manifold 013 1/2" LP Large Port 014 Std Yoke Regulator/ K-valve 015 Tank Valve Bonnet Nut 111 Small DIN Regulator/Valve 112 Standard DIN Regulator Valve 116 1/2" Tank Neck (small) 214 3/4" Tank Neck (large) Steve That is extremely usefull.. i wish i had a list like that for all my gear, scooters, lights, regs, inflator etc. Cheers Jonas

June 19th, 2007, 08:16 AM	#9 (permalink)
scorpora(Offline) Next please Join Date: May 2006 Location: spain Posts: 133	Thanks to all.

June 19th, 2007, 02:05 PM	#10 (permalink)
Divingniknaks(Offline) Resident purveyor of shiney kit.... Join Date: Nov 2005 Location: Midlands UK Posts: 1,038	Quote: (Originally Posted by scorpora) HELLO I will be very pleased if anyone give some advice for where can I buy (online) spares sets of o-rings for my 9 amp NIMH salvo light (canister and bulb)? (the ISO number of those o-rings will be also very apreciate). I have asked to divingniknaks but don´t see this stuff in the web page and I understand that no answer means no O in stock. Any helps should be greatfully paid (with prays ) Best PD. Can anyone tell me if the canister for the 9 amp NIMH battery is the same to 13.5 Lion (salvo lights of course) and they spend the same type of O rings? Thanks again! Hi, Sorry for not answering but we didn't get your original request I'm afraid. We do keep the spare lid o-rings but just never got round to putting them up on the site, email me again The can size for the 9A Nimh is not the same as the 13.5 Li Ion. And therefore the O rings are a different size again. Hope that helps Best wishes __________________ Phill ----------------------------- Salvo Lights, DirZone Gear , Frog Wings Dive ? http://www.divingniknaks.com