- What mask to buy for DIR
- Some newbie questions...
- Eclipse for doubles?
- "Cannister light wannabe"-attachment for Salvo handheld main light
- Sartek goodman handle
- Doubt with rolock o-ring
- Solus SU1250
- Reg Hose Protectors
- Bare XCD2 tech drysuite and valvedrill
- stage and weighting
- Which wing for twin 7’s: Agir Habrok 38 or 56 lbs?
- Halcyon, Metalsub and OMS work together
- apeks ds4 hose routing on evolve
- Where to place the pockets?
- Hip D ring
- Pockets?
- A newbie question: why is there only 1 spg?
- Securing SPG on stage reg setup
- DS4 on Singles Rig
- Trim weight question on single 12
- What do I clip my stage bottle to?
- Clips and D rings
- Regulator Setup for Double Tank System
- Singles rig on a budget
- Just got a new Wing
- Manifold isolator knob position
- Which wing for twin 7's and 12's?
- Si-Tech neck seal system...anybody seen these...
- Trimming Zip Seals (wrist)
- Why we do what we do - Independent Doubles... a bad idea?
- Upgrading single wing to a double wing.
- Does it come in black?
- Doubles heignt on Agir 6mm Backplate
- wetsuit and steels doubles
- budget hog-rig... TIPS
- SK-7 Compass Question
- 3l Stage
- Triglides behind the plate
- Weight question
- Balancing A Camera
- snoopy loops
- Santi Espace or Enduro
- First time diving in a oph and wing
- Wearing a BP/W - What went wrong?
- SPG hose length
- dive rite singles rig
- P valve - how do you actually use it?
- Pencil for wetnotes?
- Salvo 21w HID or Agir-Brokk Lugh 9 HID
- Storage Pak attachment
- Hose protectors
- Dry Suit hose length
- Dry suit hose route ?
- New BC system
- Salvo is now Light Monkey
- Halcyon's new cinch system
- Extra weight for a 400g suit?
- Knots for bolt snaps
- SPG Hose Routing
- Another Harness Rigging Question...
- My Backup Torches aren't compliant...
- Eclipse and weight belt annoyance!
- Suit inflation placement
- Regs setup for twins
- Backup Mask Storage
- SMB Colour Choice
- Aluminum Doubles?
- Hog looping
- Slipping crotch strap
- Dry suit inflation valve
- twinset and semi-dry
- dive rite MR-11 HID
- Goodman Handle Failure & Transporting the battery
- Seaskin drysuit
- UWATEC FS-1 or SUUNTO SK7
- Apeks DST 1/2" plug
- Kitting up
- Harness-Bryden-Buckle source?
- Dry suit drills
- Wing Inflator bungeed to D-ring
- Stage rigging. Different First stage
- Drysuit neck leaks?
- Where do you stow your DSMB reel
- Salvo HID light
- Wet Notes
- Lower dumpvalve on wing
- double 7
- Paint
- Apeks DS4 single tank diving
- Proper trim - floaty feet
- Wing inflate hose length
- Help with hose routing on DiveRite RG3000
- Best Idea Ever - Flat D12
- Configuring an Umbilical Torch
- Sling on Left or Right?
- Single tank and stage
- singles back up length
- Front D Ring
- Backup light deployment
- balanced
- ali-tek cylinders
- Explorer versus Evolve
- reg advice
- DIR Sidemount?
- Canister torch usage questions
- cunning calculation
- Finally - Nicely Weighted!
- can light.
- How much ditchable weight? Al v St bp
- MARES REG : MR32 & Proton Metal
- Bungee on bottom timer or not?
- Swedish wing-dump modification
- fs-1 compass how to remove from housing?
- Is a wing really needed?
- Reg cover colors?
- Non-adjustable backup reg
- Tying bung loop to H Proteus
- Tail Weight Alternative?
- Twinset assembly help
- Anybody hip mounting an SU-500
- Managed to mess the tuning of my Apeks
- Newbie compatiblity questions
- Apeks XTX50/DS4 or XTX200/FSR
- Backup light boltsnap direction
- Gluing Pockets onto Wetsuit
- Where to attach reels
- Boltsnap on Hollis 16w LED
- Option on moving over to rechargeable batteries in back-up torches
- How much weight?
- new double valve and 1'st stages.
- Wing Selection
- Suunto Vyper vs. Aladin 2g
- Led lamp
- Using Hollis F1 Fins with wetsuit boots
- Twinning band positioning
- Knife vs. Line Cutter?
- Weight
- Reel
- How to store 10 kg weight when travelling
- Nitrox Regulator DIN/M26 connection what to buy?
- Knife and waist belt...
- Lenght hose 2nd stage
- octo/secondary reg.
- can you fit a DIR singles rig in a DiveCaddy?
- lift bag
- Jeebus, the Santi BZ400 is warm!!
- Fins again
- Why the long hose?
- Drysuits - shell vs crushed neoprene?
- Chest D-rings
- Bare Trilam Tech Dry with TIZIP
- Cinch and argon strap
- Predator Suits
- GUE/DIR standardisation on equipment
- Accent rate reading on bottom timer
- Back up light compliance
- Inflator hose - R post. But why?
- Weight belts
- STA Weight with 7mm?
- Cable ties: bon-bon ou non?
- Converse All Stars
- Dry-suit pockets
- How to stop canister light sliding off harness
- Bungee in pockets
- Thigh Pockets
- Cutting Latex Seals
- Interesting v-/p-weights
- Doubles manifold/bands setup
- Ikelite camera with two flashes
- Surgical Tubing for Regulator Necklace
- Going back
- Where to rig my suit inflater
- Halcyon Infinity Tank wrap
- Miflex and the DIR Diver
- Stunning service from Halcyon
- SPG rigging location...
- Dry Suit Pocket Query
- Chest D-ring position
- Next time no spring straps!?
- SMB Spool
- Loose or tight Manifold nuts?
- Full Foot Fins
- Scubapro MK25 hose routing for twins?
- ditchable weights
- Fixed weights - wrong type? (photo heavy)
- Hose Protecter Sleeves
- Hose Protecter Sleeves
- What in which pocket
- Depth gauge
- Shorter primary reg hose length
- Long hose stowage
- Changing to long hose
- Backup hose length
- SMB - Oral Inflate Only vs. "No-Lock"?
- Apeks ATX200 1st stage
- Bolt snaps vs. Magnetic keepers
- mk25 adjustment
- Upwards or Downwards?
- DST or Tech 3's