DIR Explorers - View Single Post - Dry gloves - Re-assembly?

MarkEm · June 13th, 2007, 12:59 AM

Hi,

I have removed the yellow liners from my Typhoon dry gloves as they were starting to stink. I had to remove the blue outer gloves from the ring system to get at the liners (they were sewn together).

I'm going to get some thinsulate liners to go in them but I now have the problem of re-fitting the blue outer gloves to the rings. I have sat pulling my hair out trying to refit the gloves/o-ring to the rings. Is there an easy way to re-assemble the gloves? I can't find any instructions anywhere.

Help!

Thanks,

Mark.

June 13th, 2007, 12:59 AM	#1 (permalink)
MarkEm(Offline) Site Sponsor Join Date: Nov 2005 Location: Essex, UK Posts: 220	Dry gloves - Re-assembly? Hi, I have removed the yellow liners from my Typhoon dry gloves as they were starting to stink. I had to remove the blue outer gloves from the ring system to get at the liners (they were sewn together). I'm going to get some thinsulate liners to go in them but I now have the problem of re-fitting the blue outer gloves to the rings. I have sat pulling my hair out trying to refit the gloves/o-ring to the rings. Is there an easy way to re-assemble the gloves? I can't find any instructions anywhere. Help! Thanks, Mark. __________________ *WWW.DIVESIGNS.COM* Last edited by MarkEm; June 13th, 2007 at 03:17 AM.