DIR Explorers - View Single Post - What i think i want

MonkSeal · May 4th, 2007, 07:58 AM

Quote: (Originally Posted by vid)

There's a few threads on the evolve/cylinder combination the evolve is better suited to other makes of cylinders, because of the longer length (if you use evolve with fabers, you run the risk of pinching the wing on the bottom of the cylinders when putting them down as the wing is a good 1-2 inches longer).

I'd suggest either

Fabers - explorer
Heiser - evolve

Well, it depends on particular Faber model. There are several lenghts of 12's with same diameter. My Faber 12's are longer then Evolve (little but enough) and there's no chance to get wing pinched. The advice is when you buy be sure that you know all measures.

May 4th, 2007, 07:58 AM	#10 (permalink)
MonkSeal(Offline) Old Member Join Date: Feb 2006 Location: Zagreb, Croatia Posts: 488	Quote: (Originally Posted by vid) There's a few threads on the evolve/cylinder combination the evolve is better suited to other makes of cylinders, because of the longer length (if you use evolve with fabers, you run the risk of pinching the wing on the bottom of the cylinders when putting them down as the wing is a good 1-2 inches longer). I'd suggest either Fabers - explorer Heiser - evolve Well, it depends on particular Faber model. There are several lenghts of 12's with same diameter. My Faber 12's are longer then Evolve (little but enough) and there's no chance to get wing pinched. The advice is when you buy be sure that you know all measures.