Quote: (Originally Posted by Davey Willo)
Just make your self a set of air tables using Decoplanner with a 30/90 Gradient Factor, knock 20% of the depth because you're using 32% and away you go... So if you were doing a 30m dive on a fine ol'wreck, just use the 24m tables
Pete, to add to what Davey Willo has said:
cut the tables including a 3m stop
"swap" the 3m and 6m stop times ie
do the time given for the 3m stop at 6m
then do the time given for the 6m stop as the ascent time from 6m to the surface.
I'd probably increase the time taken from 6m to surface on the dive/plan but not in the tables.
Lastly, don't clutter your tables with anything with less than the longest min deco. It's just unneccessary columns.
David